The amount of money you pay for a neon sign depends on a variety of factors. These factors cause a custom neon signs letter to range from $52 to $7 per letter. The elements may vary from the time required to craft a traditional neon piece, skills of the craftsman to the craftsmanship of the craftsman. You man chose an affordable neon craftsman while considering many factors which would be best known to you.

Do neon signs use a lot of electricity?

The amount of electricity that a custom neon sign would use depends on how frequently you use the neon sign. If you use the neon sign minimal times, the amount of electricity consumption would below. In contrast, if you use the custom neon sign for longer, it is most likely to consume more power as you use it.

Always plug out neon signs when not in use. Neon signs come with a standard mains plug for easy connection to a source of power. Most importantly, it depends on whether you were supposed to use the neon sign internally or externally. Internal custom neon signs are equipped with the right parts to stay connected to a power source and be removed at any time.

How do you make your neon signs?

When making your neon signs, you need to have a piece of paper, a pencil, wire, pliers, a neon wire, string, and masking tape.

Use your pencil to outline how you would like the neon to look or read. The best way to do this would be to connect the letters of the word. Afterward, ensure you have enough wire to fit the words you choose. Cut a piece of string the length of your wire, and lay the string roughly along with the words. The string would help you know whether you have enough wire for your words. You may need to add more if you have less or reduce the size of your words to fit.

The wire you choose should be easy to bend and firm enough to hold the word into shape. A T90 14solid is a good example of a wire that would be helpful. Now bend the wire to the shape of your word. It would be beneficial to find someone to hold the letters down as you complete each of them. Use a pair of pliers to tighten any sharp corners in your letters. Cut off any excess wire when you are done.

You may choose any neon wire to complete the final steps, whether you choose a battery-operated or a plug-and-play. Use hot-glue to stick the neon wire to the already shaped wire with your preferred shape. Superglue should be an option if hot glue does not work for you. You may need to hold the two wires together until they are stuck together. Sometimes you might have to loop the neon wire and T90 12solid wire to fit.




Please enter your comment!
Please enter your name here